sobre nosaltres
- 0Anys d’experiència
- 0+
- 0K+Anys d’experiència
- 0+Les empreses mundials servien
Sèrie Nernst R Sèrie no escalfada Sonda d’oxigen d’alta temperatura
Nernst N2035A Analitzador de Dewpoint Acid Dewpoint
aplicació
-
Central elèctrica
Directly monitor the oxygen content in power plant boilers, waste incineration, kiln combustion or post-combustion flue gas with the Nernst Zirconia Oxygen Analyzer. It can reduce a lot of energy consumption, control environmental pollution, ensure safe production and prolong the service life of equipment, and recover all investment in a short time. L’analitzador de Nernst Zirconia és l’únic dispositiu que pot generar beneficis econòmics alhora que controlen la contaminació ambiental.
-
-
Indústria química
Hi ha molts entorns d’atmosfera complexos a la indústria química, amb alta temperatura, pols gran i alguns necessiten a prova d’explosions. En aquest moment, cal utilitzar productes de Nernst Oxygen Analyzer amb funció de purga. Due to the special structure design of the Nernst oxygen probe, the oxygen probe can be purged directly without shutting down, so the service life of the oxygen analyzer is greatly increased.
-
High temperature tunnel kiln, the temperature is very high, up to 1400 ℃, using Nernst high temperature probe, can be directly inserted into the furnace of high temperature kiln, directly detect the real-time oxygen content in the furnace, can accurately control product quality and reduce energy consumption. Shuttle kiln, need to measure oxygen continuously from room temperature to 1200 ℃, using Nernst injection type oxygen probe, can accurately measure oxygen content. Poseu -vos en contacte amb les dades.
-
-
Recentment, la nostra empresa va rebre un projecte. The customer's equipment for this project is a dissolving furnace with a temperature of 1300 ° C. Previously, the gas was pumped out and pretreated to measure oxygen. Because the temperature and pressure of the pumped gas have changed, the measured ...
-
Recentment, la nostra empresa va rebre un projecte. The customer's equipment for this project is a dissolving furnace with a temperature of 1300 ° C. Previously, the gas was pumped out and pretreated to measure oxygen. Because the temperature and pressure of the pumped gas have changed, the measured ...
-
-
Per obtenir consultes sobre els nostres productes o PRICELLIST, deixeu -nos el vostre correu electrònic i estarem en contacte en un termini de 24 hores.
